| WEIGHT | ||
| Total | 5,025 lbs (2279.3 kg) | |
| Tongue (Bale loader fully raised) | 1500 lbs (680.39 kg)) | |
| TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded) | ||
| Width | 8′ 4″ (2.54 m) | |
| Length | 14′ 11″ (4.55 m) | |
| Height | 11′ (3.35 m) | |
| WORKING DIMENSIONS (With 1 bale, deflector in spread position) | ||
| Width | 10′ 10″ (3.30 m) | |
| Length | 14′ 11″ (4.55 m)) | |
| Height | 11′ (3.35 m) | |
| WORKING DIMENSIONS (With 2 bales, deflector in spread position) | ||
| Width | 10′ 10″ (3.30 m) | |
| Length | 19′ 7″ (5.97 m) | |
| Height | 11′ (3.35 m) | |
| CHASSIS FEATURES | ||
| Towing Arrangement | Clevis type hitch. | |
| Jack Capacity | 5,000 lbs. (2,273 kg) | |
| Jack Travel | 10 in (25.4 cm) | |
| Bearing Type | Tapered Roller | |
| BALE LOADER | ||
| Type | Integral 2 Stage, Twin Boom Arms | |
| Bale Tines | Tubular Steel, 10° Float, 4 Position Width Adjustable | |
| Adjustable Hydraulic Cylinder | 4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting | |
| BALE CONVEYOR | ||
| Type | 3 Roller Chains with Bolt-On Cross Slat | |
| Drive | Hydraulic Orbital Motor with Adjustable Flow Control | |
| Drive Shaft Bearings | 1-1/4″ (3.18 cm) | |
| Drive Shafts | 1-1/4″ (3.18 cm) | |
| BALE SHREDDER CHAMBER | ||
| Max. Bale Weight each | 2200 lbs. (998 kg) | |
| Rotor Length | 78 in. (1.98 m) | |
| Rotor Diameter (Flails extended) | 25 in. (63.5 cm) | |
| Rotor Bearing | Ball, 2″ (5.08 cm) | |
| Number of Flails | 30 | |
| Flail type | Heavy Duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging | |
| Number of Stripper Channels | 1 | |
| Number of Slug Bars | 5 | |
| Slug Bar | Single point, 9 Adjustment Settings Through a 180° Range | |
| Delivery | Right Hand Discharge | |
| Deflector | 6 Adjustment Settings through a 120 Degree Range | |
| Max. Horizontal Spread | Straw, up to 50 ft. (15.24 m) | |
| OPERATOR CONTROLS | ||
| Loader | 1 Tractor Double-Acting Hydraulic Valve | |
| Bale Conveyor | 1 Tractor Double-Acting Hydraulic Valve | |
| Bale Conveyor Speed | Conveyor Speed Control Valve | |
| Slug Bar | Hand Lever with 5 Settings | |
| Deflector | Hand Lever with 6 Settings | |
| REQUIREMENTS FOR OPERATION | ||
| PTO Horsepower Required | 65hp (48.5kw) to 155hp (115.6kw) | |
| PTO Type | 1000 RPM, 1-3/8 in. dia. PTO Shaft with 21 Splines with choice of Constant Velocity or Standard PTO shaft | |
| Min. Tractor Hydraulic Output | 8 gpm at 1500 psi (30.3 lpm x 10,345 kPa) | |
| Tractor Hydraulic Controls | 2 Double-Acting Control Valves with Quick Coupler Outlets | |
| Tractor Weight | Must be of equal or greater weight than that of a 2660 with 2 bales | |
| SMV Sign | Standard equipment | |
| Road Lights | Standard equipment | |
Similar Products
2800 Balebuster
Call for Pricing
WEIGHT
Total
7,300 lbs. (3,311 kg)
Tongue Weight (Bale loader...
