| WEIGHT | ||
| Total | 6,830 lbs. (3,098 kg) | |
| TRANSPORT DIMENSIONS | ||
| Width | 10 ft. 3 in. (3.12 m) | |
| Height | 10 ft. 2 in. (3.10 m) | |
| Length | 20 ft. (6.10 m) | |
| CHASSIS FEATURES | ||
| Towing Arrangement | Clevis hitch | |
| Bearings | Tapered roller | |
| TUB FEATURES | ||
| Loading Height | 8 ft. (2.44 m) | |
| Tub Width at Flare | 10 ft. (3.05 m) | |
| Depth | 44-1/2 in. (1.13 m) | |
| Tub Inside dia at Base | 8 ft. (2.44 m) | |
| Tub Wall Thickness | 12 gage (2.66 mm) | |
| Tub Floor Thickness | 10 gage (3.42 mm) | |
| Drive Mechanism | Full Sprocket around tub Electro/Hydraulic | |
| Speed Control | Electronic Governor | |
| HAMMERMILL | ||
| Length | 44-1/2 in. (1.13 m) | |
| Diameter, Hammers Extended | 26 in. (66 cm) | |
| Feed Opening | 27 in. x 45 in. (68.58 cm x 114.3 cm) | |
| Hammers | 3/8 in. (9.53 mm) Thick, A.B. Hardened Swing | |
| Number of Hammers | 64 | |
| Hammer Rods | 15/16 in. (23.81 mm) dia., Case Hardened | |
| Cylinder Plates | 3/16 in. thick x 15-¾ in. dia. | |
| Cylinder Shaft | 3 in. (7.62 cm), Stress Proof Steel | |
| Drive End Bearing | 2-3/4 in.(6.99 cm), Pillow Block | |
| Idle End Bearing | 2-7/16 in. (6.19 cm), Pillow Block | |
| Screens | 1/8 in. (3.18 mm), 3/16 in. (4.76 mm), or 1/4 in. (6.35 mm) thick and various hole sizes from 1/8 in. (3.18 mm) to 4 in. (101.6 cm) | |
| Screen Area | 2,400 sq. in. (15,483 sq. cm) | |
| Drive | PTO through multiple V Belts | |
| BELLY CONVEYOR | ||
| Type | Double Free Floating Augers | |
| Auger Size | 9 in. (22.86 cm) x 96 in. (2.44 m) | |
| Width | 33-¾ in. (85.73 cm) | |
| Drive | Mechanical | |
| DISCHARGE CONVEYOR | ||
| Type | Rubber Belt with Cleats | |
| Drive | Mechanical | |
| Drive & Idler Roller Type | “Easy Clean” | |
| Length | 20 ft. (6.1 m) | |
| Width | 18 in. (45.72 cm) | |
| Maximum Conveyor Lift Height | 13 ft. 9 in. (4.19 m) | |
| Conveyor Lift | Hydraulic | |
| Conveyor Lift Cylinder | 3″ x 12″ (7.62 cm x 30.48 cm) | |
| Conveyor Fold | Hydraulic Folding Over Rear of Tub | |
| OPERATOR CONTROLS | ||
| Tub Rotation | 3 Position Hydraulic Valve for Clockwise, Stop, & Counter-Clockwise | |
| Tub Speed | DuraTech Model RCB93 Electronic Governor Stabilizes Engine Load by Controlling Tub Rotation Speed | |
| Conveyor Lift | 3-Position Hydraulic Valve for Raise, Hold, & Lower | |
| REQUIREMENTS FOR OPERATION TRACTOR | ||
| PTO Horsepower Required | 80 HP (59.7 kw) to 175 HP (130.5 kw) | |
| Min. Tractor Hydraulic Output | 8 gpm at 1500 psi (30.3 lpm x 10,345 kPa) | |
| Hydraulic Remote Controls | (1) Double-acting control valve with quick coupler outlets | |
| Electrical | 12 VDC | |
| GRINDER | ||
| Hydraulic Reservoir | 12 gallon (45.4 liter) capacity | |
| Oil Requirement | Mobil 423, Co-op Super HTB or Equivalent | |
| SMV Sign | Standard equipment | |
| Road Lights | Standard equipment | |
Similar Products
H-1130E Tub Grinder
Call for Pricing
WEIGHT
Total
20,500 lbs (9,298.64 kg)
Hitch (with convey...
H-1130 Tub Grinder
Call for Pricing
WEIGHT
Total
14,500 lbs, (6,032.78 kg)
Hitch (with convey...
H-1030 Tub Grinder
Call for Pricing
WEIGHT
Total
13,300 lbs (6,032.78 kg)
Hitch
1,925 lbs (873.17...
1155GL Tub Grinder
Call for Pricing
WEIGHT (DRY)
Total
47,640 lbs (21,609 kg)
Axle
27,900 lbs...
1155 Tub Grinder
Call for Pricing
WEIGHT (DRY)
Total
34,100 lbs. (15,468 kg)
Axle
27,900 lbs. (...
1150 Tub Grinder
Call for Pricing
WEIGHT
Total
24,850 lbs (11,272 kg)
TRANSPORT DIMENSIONS
...