H-1030 Tub Grinder
Call for Pricing
Price
Make:
Haybuster
Model:
H-1030 Tub Grinder
Category:
Haybuster, New, Tub Grinders
| WEIGHT | ||
| Total | 13,300 lbs (6,032.78 kg) | |
| Hitch | 1,925 lbs (873.17 kg) with conveyor raised and folded | |
| TRANSPORT DIMENSIONS | ||
| Width | 10′ 4″ (3.15 m) | |
| Height | 10′ 1″ (3.07 m) | |
| Length | 19′ 4″ (5.89 m) | |
| OPERATING DIMENSIONS | ||
| Total Width | 10′ 2″ (3.10 m) | |
| Total Width, Tub Raised | 11′ 9″ (3.58 m) | |
| CHASSIS FEATURES | ||
| Towing Arrangement | Clevis hitch | |
| Tires | (2) 16.5L x 16.1 SI – 14 Ply High Flotation Implement Tires | |
| Wheels | (2) 16.1 x w14c – 8 Bolt, 6″ (15.24 cm) Pilot | |
| Bearings | Tapered roller bearings | |
| TUB FEATURES | ||
| Loading Height | 9′ 2″ (2.79 m) | |
| Tub Width at Flare | 10′ 2″ (3.10 m) | |
| Depth | 44.1″ (1.12 m) | |
| Tub Inside dia at Base | 95.5″ (2.43 m) | |
| Tub Wall Thickness | 12 gauge (2.66 cm) | |
| Tub Floor Thickness | 10 gage (3.42 mm) | |
| HAMMERMILL – HEAVY DUTY | ||
| Length | 43″ (109.2 cm) | |
| Diameter, Hammers Extended | 26″ (66.04 cm) | |
| Feed Opening | 28” x 45” (71.1 cm X 114.3 cm) | |
| Hammers | HD-1/2″ (12.7 mm) A.B. Hardened Steel, Swing | |
| Number of Hammers | 64 | |
| Hammer Rods | 1-1/4″ (31.75 mm) Dia, Case-Hardened | |
| Cylinder Plates | HD Mills: 3/8″ (0.95 cm) Thick x 15 3/4″ (40.01 cm) | |
| Cylinder Shaft | 3 1/2″ (8.89 cm) Stress Proof Steel | |
| Bearings | 3″ (7.62 cm) Pillow Block | |
| Drive | PTO through Multiple V-Belts, 1,000 RPM, 1-3/8″ dia. 21 spline shaft, or 1-3/4″ dia. 20 spline shaft | |
| Screens | 1/8″ (3.18 mm), 3/16″ (4.76 mm), or ¼” (6.35 mm) Thick and Various Hole Sizes from 1/8″ (3.18 mm) to 8″ (203.2 mm) – Must Order 2 Screens of Choice With Machine-Not Standard equipment | |
| BELLY AUGERS | ||
| Size | Twin 12″ (30.48 cm) diameter x 48″ (121.92 cm) long | |
| Drive | Hydraulic | |
| DISCHARGE CONVEYOR | ||
| Type | Rubber Belt with cleats | |
| Drive | Hydraulic | |
| Drive & Idler Roller Type | Rubber Lagged Drive Pulley, “Easy Clean” Idler | |
| Length | 21′ (6.4 m) | |
| Width | 24″ (60.96 cm) | |
| Maximum Conveyor Lift Height | 14′ 9″ (4.5 m) @ 40° Incline | |
| Conveyor Lift | Hydraulic | |
| Conveyor Lift Cylinder | 3-1/2″ x 20″ (8.89 cm x 50.8 cm) | |
| Conveyor Fold | Hydraulic | |
| OPERATOR CONTROLS | ||
| Tub Rotation | Wachendorf A35 display switch controlled Clockwise, Stop, & Counter-Clockwise | |
| Tub Speed | Wachendorf A35 with ECU 710 Control Electronic Governor Stabilizes Engine Load by Adjusting Tub Rotation Speed | |
| Conveyor Lift & Fold | Electric/Hydraulic Switch Control Uses Tractor SCV | |
| Tub Tilt | Electric/Hydraulic Switch Control Uses Tractor SCV | |
| Conveyor On/Off | Wachendorf A35 display switch controlled | |
| REQUIREMENTS FOR OPERATION TRACTOR | ||
| PTO Horsepower Required | 150 HP (118.85 kw) to 315 HP (234.9 kw) | |
| Min. Hydraulic Output | 8 gpm at 1,500 psi (30.3 lpm. x 10,345 kPa) | |
| Hydraulic Remote Controls | 1 Double-Acting Control Valves With Quick Coupler Outlets | |
| Electrical | 12 VDC | |
| GRINDER | ||
| Hydraulic Reservoir Capacity | 60 gallons (227.13 L) of Hydraulic Oil (Mobile 423, CENEX Super HTB or Equivalent) |
|
| Mill Grate Kit | This kit includes; 5 removable mill grates, and 6 removable slug bars for improved grinding performance in tough hay and stover | |
Similar Products
1150 Tub Grinder
Call for Pricing
WEIGHT
Total
24,850 lbs (11,272 kg)
TRANSPORT DIMENSIONS
...
1155 Tub Grinder
Call for Pricing
WEIGHT (DRY)
Total
34,100 lbs. (15,468 kg)
Axle
27,900 lbs. (...
1155GL Tub Grinder
Call for Pricing
WEIGHT (DRY)
Total
47,640 lbs (21,609 kg)
Axle
27,900 lbs...
H-1000 Tub Grinder
Call for Pricing
WEIGHT
Total
6,830 lbs. (3,098 kg)
TRANSPORT DIMENSIONS
...
H-1130 Tub Grinder
Call for Pricing
WEIGHT
Total
14,500 lbs, (6,032.78 kg)
Hitch (with convey...
H-1130E Tub Grinder
Call for Pricing
WEIGHT
Total
20,500 lbs (9,298.64 kg)
Hitch (with convey...
107C – Seed Drill
Call for Pricing
WEIGHT
Total
4,200 lbs (1,905.1 kg)
TRANSPORT & WORKING D...
