| WEIGHT | ||
| Total | 20,500 lbs (9,298.64 kg) | |
| Hitch (with conveyor folded) | 4,700 lbs (2,131.88 kg) | |
| TRANSPORT DIMENSIONS | ||
| Width | 11′ 4′ (3.45 m) | |
| Height | 10′ 7″ (3.2 m) | |
| Length | 24′ 11″ (7.59 m) | |
| OPERATING DIMENSIONS | ||
| Total Width | 11′ 3″ (3.43 m) | |
| Total Width, Tub Raised | 12′ 6″ (3.81 m) | |
| CHASSIS FEATURES | ||
| Towing Arrangement | Clevis hitch | |
| Tires | 2) 16.5L X 16.1 (14 ply) High Flotation Implement Tires | |
| Wheels | (2) 16.1 X w14C – 8 Bolt, 6″ (15.24 cm) Pilot | |
| Bearings | Tapered roller | |
| TUB FEATURES | ||
| Loading Height | 9′ 2″ (2.79 m) | |
| Tub Width at Flare | 11′ 3″ (3.43 m) | |
| Depth | 50″ (1.27 m) | |
| Tub Inside dia at Base | 8′ 11″ (2.72 m) | |
| Tub Wall Thickness | 12 gauge (2.66 cm) | |
| Tub Floor Thickness | 10 gage (3.42 mm) | |
| HAMMERMILL – HEAVY DUTY | ||
| Length | 50″ (127 cm) | |
| Diameter, Hammers Extended | 26″ (66.04 cm) | |
| Feed Opening | 28” x 52” (71.1 cm X 132.08 cm) | |
| Hammers | HD-1/2″ (12.7cm) A.B. Hardened Steel, Swing | |
| Number of Hammers | 88 | |
| Hammer Rods | 1-1/4″ (31.75 mm), Case Hardened Steel | |
| Cylinder Plates | HD Mills, 1/2″ (12.7 mm) thick X 15.75″ (40.01 cm) | |
| Cylinder Shaft | 3 1/2″ (8.98 cm) Stress Proof Steel | |
| Bearings | 3 1/4″ (8.26 cm) Pillow Block | |
| Drive | PTO through Multiple V-Belts, 1,000 RPM, 1-3/8″ dia. 21 spline shaft, or 1-3/4″ dia. 20 spline shaft | |
| Screens | 1/8″ (3.18 mm), 3/16″ (4.76 mm), or ¼” (6.35 mm) Thick and Various Hole Sizes from 1/8″ (3.18 mm) to 8″ (203.2 mm) – Must Order 2 Screens of Choice With Machine-Not Standard equipment | |
| BELLY AUGERS | ||
| Type | Twin 12″ (30.48 cm diameter – 4′-6″(1.37 m) long) | |
| Drive | Hydraulic | |
| DISCHARGE CONVEYOR | ||
| Type | Rubber Belt with Cleats | |
| Drive | Hydraulic | |
| Drive & Idler Roller Type | Rubber Lagged Drive, “Easy Clean” Idler | |
| Length | 85001 (7.92 m) | |
| Width | 24″ (60.69 cm) | |
| Maximum Conveyor Lift Height | 18′ 6″ (5.64 m) @ 40 Degree Incline Conveyor Lift | |
| Conveyor Lift & Fold | Hydraulic | |
| OPERATOR CONTROLS | ||
| Tub Rotation | 3 Position Hydraulic Valve; Clockwise, Stop, Counter Clockwise | |
| Tub Speed | DuraTech Model RCB93 Electronic Governor Stabilizes Engine Load by Adjusting Tub Rotation Speed | |
| Conveyor Lift | 3-Position Hydraulic Valves for Raise, Hold and Lower | |
| Conveyor Fold | 3-Position Hydraulic Valves for Fold, Hold and Unfold | |
| Conveyor On/Off | 2-Position Hydraulic Valves for Forward/Off | |
| Tub Tilt | Tractor Hydraulic | |
| REQUIREMENTS FOR OPERATION TRACTOR | ||
| PTO Horsepower Required | 200 HP (149.1 kw) to 315 HP (234.90 kw) | |
| Min. Hydraulic Output | 8 gpm at 1,500 psi (30.3 lpm. x 10,345 kPa) | |
| Hydraulic Remote Controls | 2- Double Acting Valves with Quick Coupler Outlets | |
| Electrical | 12 VDC | |
| ELECTRIC MOTORS | ||
| 300 HP (223.7 kw) Drive Motor, 10 HP (7.5 kw) Hydraulic Drive Voltages Available: 460V-60Hz, 380V-50Hz, 380V-60Hz, 575V-60Hz Electric Motors require three phase power – PLEASE CHECK WITH YOUR POWER SUPPLIER FOR THE PROPER VOLTAGE AND HZ FOR YOUR AREA |
||
| GRINDER | ||
| Hydraulic Reservoir Capacity | 60 gallons (227.13 L) of Hydraulic Oil (Mobile 423, CENEX Super HTB or Equivalent) |
|
| Mill Grate Kit | This kit includes; 5 removable mill grates, and 6 removable slug bars for improved grinding performance in tough hay and stover | |
Similar Products
H-1130 Tub Grinder
Call for Pricing
WEIGHT
Total
14,500 lbs, (6,032.78 kg)
Hitch (with convey...
H-1030 Tub Grinder
Call for Pricing
WEIGHT
Total
13,300 lbs (6,032.78 kg)
Hitch
1,925 lbs (873.17...
H-1000 Tub Grinder
Call for Pricing
WEIGHT
Total
6,830 lbs. (3,098 kg)
TRANSPORT DIMENSIONS
...
1155GL Tub Grinder
Call for Pricing
WEIGHT (DRY)
Total
47,640 lbs (21,609 kg)
Axle
27,900 lbs...
1155 Tub Grinder
Call for Pricing
WEIGHT (DRY)
Total
34,100 lbs. (15,468 kg)
Axle
27,900 lbs. (...
1150 Tub Grinder
Call for Pricing
WEIGHT
Total
24,850 lbs (11,272 kg)
TRANSPORT DIMENSIONS
...